358 anti climb fence, known as "prison mesh", is a high security anti-climbing and anti-cutting welded wire fence. Galvanized wire, commonly, is welded into fencing panels with extremely fine opening holes, which cannot be penetrated by hand fingers or cut by bolt cutters. Therefore it is highly recommended for high security needed area and private living field.

The name-358 high security fence comes from the size of panel mesh opening and wire diameter: 3'' × 0.5'' × 8 gauge, approximately equals to: 76.2 mm × 12.7 mm × 4 mm. As a welded wire fence, galvanized after welded and then PVC coated is recommended for a sturdy structure and corrosion resistance ability.

358 anti climb fence features:
Anti-climb: The opening holes are so small that even fingers cannot penetrate in.
Anti-cut: Bolt cutter and wire cutter cannot make itself through the narrow holes, therefore the fence won't be destroyed.
Strong welded point: The welded joints are fixed firmly, won't split by natural human and nature force.
Smooth surface: The panel finish surface is well-proportioned for a decorative effect.
Durable: The panel sheet is galvanized uniformly and PVC coated, which ensures a long service life.

358 anti climb fence application:
358 anti climb fence is a high secure fence, suitable places include:
Prison.
Military sites.
Detention center.
Psychiatric hospital.
Airport.
Bridge.
Sub-station.
Shipping port.
Warehouse.
Power plant.
Laboratory.
Petroleum and chemical facilities guarding.
Industrial and commercial property, etc.

Specification:
358 mesh fence panel size
Mesh pattern: 76.2 mm (3") × 12.7 mm (0.5").
Wire diameter: 4 mm horizontal wire and vertical Wire.
Weld strength: range 540–690 N/m2.
Surface treatment: 358 mesh fence panels made from galfan wire, then PVC powder coating (Min. 100 micron), or PVC powder painting. It provides additional protection and increases the potential life span.
Colors: green (RAL 6005), black (RAL 9005). All RAL color is available.
Accessories: posts, post base feet, barbed wire, slotted clamp bars, post cap, bracket, bolts, spacer, nuts, washer, clips, etc.

Fence posts
Material: high grade steel for maximum strength and rigidity.
Post section: 60 × 60 mm, 80 × 80 mm, 100 × 100 mm, 120 × 120 mm.
Post Plate thickness: 2.5 mm or 3.0 mm, 4.0 mm, 5.0 mm.
Finish: inside and outside galvanized (Min. 275 g/m2), subsequently covered with a polymer powder (Min. 60 micron ).
Colors: same as panel.
Post cap: metal caps or plastic cap.
Metal clips and clamps are hot dip galvanised then powder coating in green or black color.

Anti-Climb 3510 Mesh Fence